Autodesk Fusion 360 CAM for CNC Machining workshop [DE/ENG]
This workshop is part of the CAD–CAM–CNC process chain and requires previous knowledge in CAD. We strongly recommend attending the „Autodesk Fusion 360 CAD Introduction Workshop“ prior to this workshop if you have no experience in Fusion 360 or other CAD software. Throughout this workshop a deep understanding of Autodesk Fusion 360 CAM module will be mediated. At the end of the workshop you will have learned how nest the design using Autodesk Fusion360’s CAM module (Computer-Aided Manufacturing) in preparation for the „Introduction to 3-Axis CNC Machining“ workshop.
Price (per person):
- For MotionLab-Member: 65€
- For Non-Member: 85€
ab 65,00 €
inkl. 19 % MwSt.
Beschreibung
Autodesk Fusion 360 CAM for CNC Machining workshop [DE/ENG]
Goals and Skills
Throughout this workshop, a deep understanding of Autodesk Fusion 360 CAM module will be mediated. At the end of the workshop you will have learned how nest the design using Autodesk Fusion360’s CAM module (Computer-Aided Manufacturing) in preparation for the „Introduction to 3-Axis CNC Machining“ workshop. You will learn how to set milling-paths in your design and how to showcase the milling process within Fusion 360. Finally you will get insights on how to export your design into a format that is compatible with MotionLab.Berlins CNC mill.
Because the workshop is part of the CAD–CAM–CNC process chain, we strongly recommend attending the „Autodesk Fusion 360 Introduction Workshop“ prior to this workshop if you have no experience in Fusion 360 or other CAD software.
This workshop gives you all the preparation you need to attend the „Introduction to 3-Axis CNC Machining“ workshop, which enables you to safely use MotionLab.Berlins CNC mill both safely and independently.
Method
In the four hours you are going to learn how to:
- Create a design in Autodesk Fusion 360
- Set milling paths in Fusion 360 CAM
- Use Autodesk Fusion 360’s CAM module to nest your components
- Showcase the milling process with Fusion 360 CAM
- Transfer your file to the CNC machine
Pre-Requisites
- Laptop pre-installed Autodesk Fusion 360 (free Download)
- Mouse with a mouse wheel
- FFP2 mask
- Corona Rapid Test (negative)
Other material for the workshop will be provided and are included.
Note: This workshop can only take place if there is a required minimum of two participants reached. In case you are the only participant for this workshop you will be noticed 24 hours prior to the workshop and given an alternative date.
Zusätzliche Information
| Skill Requirements | This workshop is part of the CAD–CAM–CNC process chain and requires previous knowledge in CAD. We strongly recommend attending the „Autodesk Fusion 360 Introduction Workshop“ prior to this workshop if you have no experience in Fusion 360 or other CAD software. |
|---|---|
| Duration | Total: 4-5 hours |
| Location | MotionLab.Berlin Please meet at the info desk. |
| Instructor | Eddel Beck |
| Minimum of participants | This workshop can only take place if there is a required minimum of two participants reached. In case you are the only participant for this workshop you will be noticed 24 hours prior to the workshop and given an alternative date. |
8 Bewertungen für Autodesk Fusion 360 CAM for CNC Machining workshop [DE/ENG]
Das könnte dir auch gefallen …
-
![Introduction to 3-Axis CNC Machining [DE/ENG]](https://berlin-tech-academy.de/wp-content/uploads/2020/02/CNC_introduction2-560x560.jpg)
![Introduction to 3-Axis CNC Machining [DE/ENG]](https://berlin-tech-academy.de/wp-content/uploads/2020/02/20200702_140219-560x560.jpg)
- Introduction to 3-Axis CNC Machining [DE/ENG]
-
- ab 140,00 €
-
inkl. 19 % MwSt.
- Weiterlesen
Johannes –
This course was the perfect theoretical lead for the next days practical Hands-on CNC workshop.
The cours leaders are very patient, and willing to explain and help. The amound of knowledge being transmittered was not too much for one day, yet enough to feel save generating your own G-Codes.
I’m glad I came across this option to learn about CAM. The price is reasonable for what you are learning!
Caroline –
Another fantastic workshop taught by Eddel!
This workshop is well structured and a great continuation of the Fusion 360 introductory course. After having completed this workshop, I feel very comfortable using Autodesk Fusion 360.
Bela Alexander (Verifizierter Besitzer) –
Vielen Dank Eddel! Durch die Skills die mir im Workshop beigebracht wurden konnte ich heute mein eigenes Projekt mit Fusion 360 umsetzen
Duncan (Verifizierter Besitzer) –
Eddel is great, such a natural teacher. He walked us through everything we needed to set up a CAM file for the CNC.
Moritz (Verifizierter Besitzer) –
Great workshop, gained some good knowledge about the Software!
Johannes Müller (Verifizierter Besitzer) –
Truly intense, funny and very educational workshop on first steps CNC milling preparation! Thank you so much Eddel!
Luca Kriebel –
Great Introduction to CAM! Thank you very much Eddel. I learned a lot.
Ken (Verifizierter Besitzer) –
Thanks Eddel for the great workshop! I really enjoyed your teaching skills and can’t wait to CAM/CNC stuff now 🙂